IN STOCK! - ISIS Performance Water Neck Outlet - Nissan SR20DET S14/S15 Style - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Enjuku Racing · 01-29-2015, 11:10 AM

IN STOCK! - ISIS Performance Water Neck Outlet - Nissan SR20DET S14/S15 Style With 1/8 npt Coolant Temp Sensor Port

*brndck* · 01-29-2015, 11:42 AM

thats cool and all, but they normally only go for like $40-50 for oem ones. other than being new, what are the advantages of this part vs. an oem s14/15 water neck?

Enjuku Racing · 01-29-2015, 12:19 PM

Quote:

Originally Posted by brndck

thats cool and all, but they normally only go for like $40-50 for oem ones. other than being new, what are the advantages of this part vs. an oem s14/15 water neck?

Oem S14/S15's sell for $69.99 new, same price as the Isis Performance water necks. Isis Performance water necks have a 1/8th npt coolant temp sensor port. OEM does not.

*brndck* · 01-29-2015, 12:33 PM

so it has a sensor port in addition to the bleeder screw?

Enjuku Racing · 01-29-2015, 01:18 PM

Quote:

Originally Posted by brndck

so it has a sensor port in addition to the bleeder screw?

Correct. Sensor port, port for coolant return, and bleeder.

Alan_405 · 01-29-2015, 02:01 PM

Sweet....i had a hole drill and fitting welded on my oem water neck. This would look mich cleaner....make it easier to hook up and take off lines as well

*brndck* · 01-29-2015, 02:13 PM

Quote:

Originally Posted by Enjuku Racing

Correct. Sensor port, port for coolant return, and bleeder.

word. definitely worth the price then.

***dorkidori_s13*** · 01-29-2015, 02:38 PM

of course i just bought temp sensor adapter and cut my upper radiator hose in half... UGH!!!

i think i might buy one of these in the next month or so and replace the upper hose in my engine bay with a black samco hose. OE sleeper look FTW

g_mac530 · 01-29-2015, 09:17 PM

Are the sensor readings accurate with the port directly in the water neck? Just wondering if having a temp sensor so close to the engine would cause the sensor to read a little bit higher

iRONDONkey · 01-30-2015, 07:03 AM

finally..... its being made.

guntop116 · 01-30-2015, 07:27 AM

No, this is the end where hot coolant comes out of the engine, which is why the part is called an Outlet. And yes, the temp would read higher then where the OEM sensor is.

Dboyizmlg · 01-30-2015, 12:01 PM

Need one of these!

vipergtsr1000hp · 01-30-2015, 01:39 PM

Had one of these.

Great price and quality.

01-29-2015, 11:10 AM	#1
Enjuku Racing Zilvia.net Advertiser Join Date: Feb 2002 Location: Clermont, FL Age: 40 Posts: 3,049 Trader Rating: (29) Feedback Score: 29 reviews	IN STOCK! - ISIS Performance Water Neck Outlet - Nissan SR20DET S14/S15 Style IN STOCK! - ISIS Performance Water Neck Outlet - Nissan SR20DET S14/S15 Style With 1/8 npt Coolant Temp Sensor Port __________________ Office: 352-241-8399 / 1-888-SR20DET (772-0338) YouTube.com/c/EnjukuRacingParts http://www.enjukuracing.com [email protected]

01-29-2015, 02:38 PM	#8
*dorkidori_s13* ITS LISA'S FAULT!!! Join Date: Jun 2003 Location: Las Vegas Age: 42 Posts: 7,487 Trader Rating: (41) Feedback Score: 41 reviews	of course i just bought temp sensor adapter and cut my upper radiator hose in half... UGH!!! i think i might buy one of these in the next month or so and replace the upper hose in my engine bay with a black samco hose. OE sleeper look FTW __________________ Check out my IG for what I'm up to! DORKIDORI INSTAGRAM!!!

01-30-2015, 07:03 AM	#10
iRONDONkey Zilvia Junkie Join Date: Sep 2007 Location: in yo mailbox! Posts: 463 Trader Rating: (1) Feedback Score: 1 reviews	finally..... its being made. Last edited by iRONDONkey; 01-30-2015 at 03:11 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-29-2015, 02:01 PM	#6
Alan_405 Zilvia Member Join Date: Sep 2009 Location: Navarre, FL Age: 44 Posts: 291 Trader Rating: (5) Feedback Score: 5 reviews	Sweet....i had a hole drill and fitting welded on my oem water neck. This would look mich cleaner....make it easier to hook up and take off lines as well

01-30-2015, 07:27 AM	#11
guntop116 Leaky Injector Join Date: Oct 2006 Location: Des Moines, IA Age: 37 Posts: 59 Trader Rating: (5) Feedback Score: 5 reviews	No, this is the end where hot coolant comes out of the engine, which is why the part is called an Outlet. And yes, the temp would read higher then where the OEM sensor is.

01-30-2015, 12:01 PM	#12
Dboyizmlg Nissanaholic! Join Date: Aug 2011 Location: SoCal (I.E.), San Berdino, Colton, Redlands Posts: 1,675 Trader Rating: (18) Feedback Score: 18 reviews	Need one of these!

01-30-2015, 01:39 PM	#13
vipergtsr1000hp Zilvia Junkie Join Date: Apr 2010 Location: dirty south Posts: 307 Trader Rating: (2) Feedback Score: 2 reviews	Had one of these. Great price and quality.