IA KA-T turbo parts - nismtronic, injectors, he315, and more.

[basicmods]

Well guys, I sold my S12 so I'm out of the game. I have a BUNCH of parts I was storing in prep for KA24De turbo project that never happened. Instead of all this stuff sitting around, I figure maybe I can sell it to fund other projects. Located in eastern IA. Shipping at buyers expense. All parts for KA24DE.

Stuff for sale:

NismotronicSA tunable ECU installed in S13 KA24DE ECU. Comes with everything needed including the breakout box. This was in my car and running, but pulled from my car before I sold it. Comes with software (download from website) and all the stuff that normally comes with the NismotronicSA and it's already installed in a ECU. Also comes with moates bluetooth module installed. $450 - SOLD!

Innovative LC1 wideband O2 w/ LCD display. works, but o2 sensor may need replaced as it's been several years since i used it. Comes with a little LCD screen to read AFR and cables to hook to your computer (you will need a usb-serial adapter) - $100

Holset HE351CW turbo - been sitting a while. Minimal play, pulled from running truck. $225 - SOLD

qty (6) Deatschworks 740cc injectors - cleaned and flow tested by deatschwerks and never installed since - still sealed in bags. Flow results available. Have 6 total injectors - get 6 for less than the price of 4! Comes with KA24DE fuel rail and regulator. WAS $400, now $430 - read below
UPDATE ON INJECTORS - I have sent these back to DW for flow check and actuation to make sure they are working. Including shipping to/from Deatschwerks, this would normally cost ~$50. I am increasing the price of the injectors from $400 to $430. This will include new flow test results and verification of function. I will post back once I recieve these back from DW to let you know they are available again. If you are interested and want them - PM me and we can work something out. SOLD

Fidanza KA24DE aluminum flywheel - needs friction surface replaced (~ $50 most everywhere) - $120

JGY top feed fuel rail with brackets and 50 lb injectors that are probably not good anymore from sitting so long. Would recommend cleaning at a minimum - $50

Large FMIC - >3" thick, approx 12" tall, probably 24" wide. $50.

No name stainless t3 tubular manifold - $50

No name welded t2 log manifold - $40

Bunch of other stuff I will update as I find/have time. I will also add some more pictures as I get a chance to take them. Reply here or via PM

Thanks! Pics coming soon.

[basicmods]

Spec stage 3 6 puck clutch - $150
N62 MAF with pigtail - $75 - SOLD
OE garret sr20 t25 turbo - typical shaft play, $125 - SOLD
Deatschwerks 300 lph fuel pump and new sock - $80
Couple of downpipes, both 3" diameter - one stainless with flex pipe - $30
One ceramic coated thats flaking a bit - $20
KA24DE fuel rail with FPR - $30
No name 38mm wastegate - $35 SOLD
No name BOV on piece of intake pipe - $30

PICTURES! - https://goo.gl/photos/E2MHHosi395yqatt6

[rawgarage]

Text me 9792366891

[basicmods]

bump to the top! Also - I'm including a KA24DE side feed fuel rail w/ regulator with the 740CC injectors. OP updated.

[basicmods]

Bump it up again.

[kruked]

How long have those injectors been sitting for since flow tested?

[basicmods]

They were tested 06-16-2014, so a bit over 2.5 years. Stored inside my house still sealed in the bags provided by Deatschwerks. I just emailed them to see if there would be any issues with installing them after sitting. Will report back with their response.

[Agent S14]

the downpipe with the flex pipe looks to be extended for ka-t for frame clearance? can you verify? may be interested. might save me time and headache

[boya1989]

Pictures of the holset!?

[basicmods]

Originally Posted by boya1989

Pictures of the holset!?

Sure, I thought I had some in the album. I'll get some pics tonight.

[boya1989]

Yeah I looked in your album before I wrote that ha ha thanks bud!

[basicmods]

Originally Posted by kruked

How long have those injectors been sitting for since flow tested?

Heard back from Deatschwerks:
"
Thank you for contacting us with your inquiry.

Injectors do not like to sit for longer than a few months, even with the stabilization fluid we pulse through them before packaging.

Most of the time, the injector pintle will stick, but is usually freed after it is pulsed a couple of times.

You could try installing them or if you want to send them in, we can pulse them and repackage them at no charge.
"

I think I'll send them back to DW and have them pulse them to make sure they still work. If I do - the price will increase to cover shipping to/from DW.

[basicmods]

Bump to the top.

Injectors are going back to Deatschwerks for pulsing/pre-check testing.

[basicmods]

Bump to the top - dropped some prices.

[Tru_2_KA]

Pics of the manifold?

[basicmods]

Pics are in the google photos album - https://goo.gl/photos/E2MHHosi395yqatt6

[basicmods]

and ttt again.

[basicmods]

Bump it up!!

[basicmods]

Back to the top - injectors are back from Deatschwerks and all 6 tested/flow checked and passed. 2% variance at full flow. New price for 6 injectors, $420 w/ the KA24DE rail.

740cc injectors SPF

[basicmods]

TTT again. Taking reasonable offers.

[coupe92]

you have a pm, interested in 1 or 2 injectors

[basicmods]

740cc Injectors are sold.

[ivanotero18]

Interested in the turbo