Ls coil pack trouble help plz? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

NateMR2 · 10-25-2016, 09:49 PM

So i wired up and installed some ls coil packs started the car.. Well it runs weird motor seems to shake a bit more i have a very short exhaust i installed at the same time out the hood and it is back firing a little i checked the timing on the first cylnder and and the timing marks are no where to be found the were on the bottom so 180 degrees oit? No way car wouldnt run i am so confused... I tried adjusting the cas a bit and it didnt seem to do a lot. Im pretty sure there all wired to the correct plug 95% and there is no way no1 could be wrong no wire is long enough for that. I am running on the stock ecu but from what i ready other people do this with no issue i have a series 2. Any help plz and thank u. Cylnder 2 was showing advance 31 degrees its very strange

KAT-PWR · 10-25-2016, 10:00 PM

Wow. Just wow.

derass · 10-25-2016, 10:32 PM

I think that with the clear, detailed information you've provided someone should be able to help.

NateMR2 · 10-25-2016, 11:02 PM

Quote:

Originally Posted by KAT-PWR

Wow. Just wow.

Im so glad u comment on all my posts ur such a huge help.

KAT-PWR · 10-25-2016, 11:56 PM

You're welcome, not all heros wear capes.

TheRealSy90 · 10-26-2016, 08:23 AM

Sounds like you mixed up the firing order when deleting the coilpack igniter.

Juan@Fontananissan · 10-26-2016, 09:39 AM

Quote:

Originally Posted by TheRealSy90

Sounds like you mixed up the firing order when deleting the coilpack igniter.

sounds like it.

NateMR2 · 10-26-2016, 11:03 AM

Quote:

Originally Posted by TheRealSy90

Sounds like you mixed up the firing order when deleting the coilpack igniter.

Its a s2 so no igniter i dont think i could have messed up the order cause the wires arent long enough 😲

TheRealSy90 · 10-26-2016, 12:32 PM

Well at least we know now what engine you have, your first post didn't really state anything.

NateMR2 · 10-26-2016, 12:59 PM

Quote:

Originally Posted by TheRealSy90

Well at least we know now what engine you have, your first post didn't really state anything.

Sorry about that

NateMR2 · 10-26-2016, 01:01 PM

I mean pretty much all that was done was used existing power for all 6 used existing ground andded one ground to all 6 then the signal

NateMR2 · 10-26-2016, 07:28 PM

Fixed cylnder one and 2 were flipped took the plugs out they were soaked

10-25-2016, 09:49 PM	#1
NateMR2 Join Date: Jan 2013 Location: new mexico Age: 34 Posts: 35 Trader Rating: (0) Feedback Score: 0 reviews	Ls coil pack trouble help plz? So i wired up and installed some ls coil packs started the car.. Well it runs weird motor seems to shake a bit more i have a very short exhaust i installed at the same time out the hood and it is back firing a little i checked the timing on the first cylnder and and the timing marks are no where to be found the were on the bottom so 180 degrees oit? No way car wouldnt run i am so confused... I tried adjusting the cas a bit and it didnt seem to do a lot. Im pretty sure there all wired to the correct plug 95% and there is no way no1 could be wrong no wire is long enough for that. I am running on the stock ecu but from what i ready other people do this with no issue i have a series 2. Any help plz and thank u. Cylnder 2 was showing advance 31 degrees its very strange Last edited by NateMR2; 10-25-2016 at 11:10 PM..

10-25-2016, 10:00 PM	#2
KAT-PWR Nissanaholic! Join Date: Dec 2011 Location: US Posts: 2,040 Trader Rating: (11) Rides Gallery: KAT-PWR Feedback Score: 11 reviews	Wow. Just wow. __________________ MRP Manufacturing

10-25-2016, 11:56 PM	#5
KAT-PWR Nissanaholic! Join Date: Dec 2011 Location: US Posts: 2,040 Trader Rating: (11) Rides Gallery: KAT-PWR Feedback Score: 11 reviews	You're welcome, not all heros wear capes. __________________ MRP Manufacturing

10-25-2016, 10:32 PM	#3
derass Zilvia FREAK! Join Date: Jun 2010 Location: Toronto, ON Age: 36 Posts: 1,182 Trader Rating: (0) Feedback Score: 0 reviews	I think that with the clear, detailed information you've provided someone should be able to help.

10-26-2016, 01:01 PM	#11
NateMR2 Join Date: Jan 2013 Location: new mexico Age: 34 Posts: 35 Trader Rating: (0) Feedback Score: 0 reviews	I mean pretty much all that was done was used existing power for all 6 used existing ground andded one ground to all 6 then the signal

10-26-2016, 07:28 PM	#12
NateMR2 Join Date: Jan 2013 Location: new mexico Age: 34 Posts: 35 Trader Rating: (0) Feedback Score: 0 reviews	Fixed cylnder one and 2 were flipped took the plugs out they were soaked