has anybody put speedo drives in these? I have the nismo cross reinforced box which had provisions on the main shaft for a speedo drive, ie had the two grooves and hole for a steel ball with the rear housing having a removable bung over the vss hole.
i did a little tinkering myself..
i put a drive gear on the main shaft using an rb25 auto speedo drive gear. it is 2mm smaller in internal diameter. but very carefully i was able to bore it out enough just before the gear became too thin. it was also to wide to fit in the space provided. so i ground it down on a bench grinder and tidied it all up.
i will be using a c34 vss and i am hoping that it will do the trick. if not i will have to find myself a s14 vss.
have heard of people running s15 abs computer etc etc but too much of a hassle for me and i already took my abs out anyhow
|