Quote:
Originally Posted by McRussellPants
dudes problem is 1000% that 225/45. iirc that's taller than a 245/40.
anyway, here's a thing I'm working on.
Clearing room for big heat exchangers on the front of this time attack Z32 and decided to go to a vertical tension rod pin on a Z32 for front end anti dive adjustment.
forgot the first pic was it propped together, second picture has it all bolted up to roll around the shop.
|
This is very cool. I've always wanted to mess with anti-dive. Let us know how testing goes!
Quote:
Originally Posted by koukimonst3r
Forgot to add I have 50mm koguchi power fender, it's definitely rubbing on my tucked wiring harness. I know roy_goldstar is selling a wire harness shield.
I probably have to keep running 15mm spacers to clear coilovers forever on a 105.j unless there's a solution out there. Not hitting any suspension as we speak, I ran 10j +12 fine prior to this new 10.5j 0 setup.
|
Get out the hammer.