Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Imarvin240 · 02-10-2014, 02:32 PM

Alright, well this thread is only worth having, if it at least gives some information and not just photos. This can be a thread to help people in building/sourcing parts for a VE engine. Here is a slight breakdown on my engine setup. It is still unfinished, as you can see from the photos above, but here is what it consists of so far.

Head!
Mazworx Fully Built p11 sr20ve head
CNC ported combustion chambers
Competion race 5 angle valve job
Supertech everything:
Supertech 116lb dual valve springs
Supertech Titanium retainers
Supertech valve guides
Supertech Inner valve spring seats
Supertech +1mm oversized valves.
Gasket matched and opened up exhaust ports to match intake ports
P12 cams
Greddy Adjustable Cam Gears
P12 valve cover
P12 OEm Nissan coil pack cover
P12 cam angle sencor
New OEM guides
Mazworx 1/2" headstuds

Block!
Mazworx stroked SR20 Block
CP Piston 90mm 9.0:1
CROWER I-Beam Rods
Power Enterprise 90mm head gasket with fire ring
Calico Coated ACL Bearings for Main, Rods, and Thrust Washers
ARP Main Studs
New OEM Nissan Oil Pump
Darton Ductile Iron Sleeves
New OEM Nissan SR20 Crankshaft
Nismo Pilot Roller Bearing
Oil Groove Machining
19mm Rod Bearing Machining
Check, Polish, Balance Crank
All new OEM Nissan freeze/block plugs.
ATI Damper Pulley
Mazworx Water Pump Block Off Plate
Mazworx Dry Sump Setup
Naprec Power Steering pump Bracket

Exhaust Setup!
Custom TF Works dual wastegate T4 twin scroll bottom mount exhaust manifold
Precision Turbo 5862 twin scroll ceramic ball bearing turbo
Dual Tial 38mm wastegates

Intake Setup!
Custom TF Works Intake manifold
Billet 90mm Throttle Body
Injector Dynamics 2000cc injectors (running E85 fuel)

Electronics Engine Support!
Custom TF Works Wire Harness
AEM Pencil Coils
Davies Craig Electronic water pump & controller
New OEM Quest Alternator
ProEFI Pro128 Standalone ECU

Transmission Setup!
Mazworx Z33 Transmission to SR20 Bracket
Mazworx Z33 Machined Transmission
OS Giken 6-speed Gear set
Tilton Hydraulic Release Bearing Kit
Exedy Triple Plate Clutch

If you have any questions on my setup, just ask.

The link to the build thread is: http://zilvia.net/f/builds-builds-on...car-build.html

02-10-2014, 02:32 PM	#11
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,721 Trader Rating: (18)	Alright, well this thread is only worth having, if it at least gives some information and not just photos. This can be a thread to help people in building/sourcing parts for a VE engine. Here is a slight breakdown on my engine setup. It is still unfinished, as you can see from the photos above, but here is what it consists of so far. Head! Mazworx Fully Built p11 sr20ve head CNC ported combustion chambers Competion race 5 angle valve job Supertech everything: Supertech 116lb dual valve springs Supertech Titanium retainers Supertech valve guides Supertech Inner valve spring seats Supertech +1mm oversized valves. Gasket matched and opened up exhaust ports to match intake ports P12 cams Greddy Adjustable Cam Gears P12 valve cover P12 OEm Nissan coil pack cover P12 cam angle sencor New OEM guides Mazworx 1/2" headstuds Block! Mazworx stroked SR20 Block CP Piston 90mm 9.0:1 CROWER I-Beam Rods Power Enterprise 90mm head gasket with fire ring Calico Coated ACL Bearings for Main, Rods, and Thrust Washers ARP Main Studs New OEM Nissan Oil Pump Darton Ductile Iron Sleeves New OEM Nissan SR20 Crankshaft Nismo Pilot Roller Bearing Oil Groove Machining 19mm Rod Bearing Machining Check, Polish, Balance Crank All new OEM Nissan freeze/block plugs. ATI Damper Pulley Mazworx Water Pump Block Off Plate Mazworx Dry Sump Setup Naprec Power Steering pump Bracket Exhaust Setup! Custom TF Works dual wastegate T4 twin scroll bottom mount exhaust manifold Precision Turbo 5862 twin scroll ceramic ball bearing turbo Dual Tial 38mm wastegates Intake Setup! Custom TF Works Intake manifold Billet 90mm Throttle Body Injector Dynamics 2000cc injectors (running E85 fuel) Electronics Engine Support! Custom TF Works Wire Harness AEM Pencil Coils Davies Craig Electronic water pump & controller New OEM Quest Alternator ProEFI Pro128 Standalone ECU Transmission Setup! Mazworx Z33 Transmission to SR20 Bracket Mazworx Z33 Machined Transmission OS Giken 6-speed Gear set Tilton Hydraulic Release Bearing Kit Exedy Triple Plate Clutch If you have any questions on my setup, just ask. The link to the build thread is: http://zilvia.net/f/builds-builds-on...car-build.html __________________ https://instagram.com/eck_matthew/ Last edited by Imarvin240; 02-11-2014 at 12:00 AM..