after scouring through all my parts boxes i finally found my long lost tension rods lol now i can take it to get an alignment ^_^
When i installed the brembos i had to run a spacer to clear the rim, putting a 15 mil on there pushes the wheel out a little bit too far than what i like.
So bought some gktech extended studs to use some 10 mil slip on spacers.
tried to do this without taking then brakes off, was a little worried and upset when I knocked out the first stud to find out it was hitting a dust shield around the hub.....
Pulled the brakes off and noticed a grove/cut out for removing the studs (whew)