Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - How-to: S13 JDM Digital Climate Control

johnnc · 09-04-2007, 04:54 PM

Excellent write up. I installed my DCC a while back using your write up and various other "how to's". I am having an issue with my fan motor and hoping someone can help me. The only thing I did not replace during the install is the Thermo control amp.

The problem: I cannot get the fan motor to turn on and cycle through the speeds.

I have tried 3 blower motor controllers and I am stumped. I can get the fan to come on HIGH if I take a wire and put one end in the top left and the other end in the bottom left wires of the blower motor controller plug. I am using the 3 wire JDM blower motor controller.

Do I have a bad DCC?
Any help is greatly appreciated.

09-04-2007, 04:54 PM	#16
johnnc Join Date: Mar 2007 Location: SoCal Age: 55 Posts: 25 Trader Rating: (0)	DCC Help Excellent write up. I installed my DCC a while back using your write up and various other "how to's". I am having an issue with my fan motor and hoping someone can help me. The only thing I did not replace during the install is the Thermo control amp. The problem: I cannot get the fan motor to turn on and cycle through the speeds. I have tried 3 blower motor controllers and I am stumped. I can get the fan to come on HIGH if I take a wire and put one end in the top left and the other end in the bottom left wires of the blower motor controller plug. I am using the 3 wire JDM blower motor controller. Do I have a bad DCC? Any help is greatly appreciated.