|
My comments to make this job easier.
For the big bulb holder, you can use just about any Nissan bulb holder that comes in the front bumper of just about any Nissan (e.g. Maxima, Sentra, S13/S14, Pulsar, etc.).
Single filament 2 wire or dual filament 3 wire bulb holders will work just fine.
The poster elected to use a 3 wire bulb holder and this works. If you can't find a 3 wire, a 2 wire holder will work as well.
If given the choice, I would use a 2 wire one because replacement bulbs are cheaper and it's a cleaner install.
If you use the 3 wire one, make sure you wire the turn signal to the big filament on the bulb. Otherwise your turn signal will be really dim.
On the bulb itself, it doesn't matter which wire you hook up. As long as one wire gets power and the other wire gets ground it will work.
Good luck.
|