Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

BUKA · 07-13-2020, 02:45 AM

Hello!
I warmly welcome all fans of sports Nissans. i'd like to share the development of my project.
So what we have at the moment... S14 zenki with rb25det removed. Instead of this engine will be installed v8 VH41DE with Z33 transmission.
Short list:
-VH41DE
-Z33 gearbox
-SR20 OS Giken clutch and flywheel
-350Z carbon fiber drive shaft
-ets.

The first task is to ideally combine the engine gearbox and clutch. For this i decided to apply 3d modelling. Naturally this idea will require many dimentions.
It was decided to apply high-precision contact and laser 3D scanning of the car body, gearbox and get all the necessary clutch sizes.

Let's go along the path of proper engineering)

Other tasks will be sloved in parallel like:

-calculation of the correct position and angle of inclination of the engine and gearbox
-VH/Z33 adapter plate modelling and manufacturing
-engine and gearbox mounts modelling
- modelling of a new gearbox tunnel
-modelling of a proper z33 gearbox shifter relocation

Later VH will be turbocharged.

And the cherry on the cake will be the development of the original wide body kit. Work is already underway in this direction.

I hope you will be interested to watch such a serious degeneration of the car.

07-13-2020, 02:45 AM	#1
BUKA Join Date: Jul 2020 Location: Russia Age: 45 Posts: 8 Trader Rating: (0)	3d swap and wide body kit Hello! I warmly welcome all fans of sports Nissans. i'd like to share the development of my project. So what we have at the moment... S14 zenki with rb25det removed. Instead of this engine will be installed v8 VH41DE with Z33 transmission. Short list: -VH41DE -Z33 gearbox -SR20 OS Giken clutch and flywheel -350Z carbon fiber drive shaft -ets. The first task is to ideally combine the engine gearbox and clutch. For this i decided to apply 3d modelling. Naturally this idea will require many dimentions. It was decided to apply high-precision contact and laser 3D scanning of the car body, gearbox and get all the necessary clutch sizes. Let's go along the path of proper engineering) Other tasks will be sloved in parallel like: -calculation of the correct position and angle of inclination of the engine and gearbox -VH/Z33 adapter plate modelling and manufacturing -engine and gearbox mounts modelling - modelling of a new gearbox tunnel -modelling of a proper z33 gearbox shifter relocation Later VH will be turbocharged. And the cherry on the cake will be the development of the original wide body kit. Work is already underway in this direction. I hope you will be interested to watch such a serious degeneration of the car.