View Single Post
Old 06-30-2005, 11:25 PM   #1
sil80SR's Avatar
Join Date: Jun 2005
Location: Charlotte, NC
Age: 31
Posts: 2
Trader Rating: (0)
sil80SR is an unknown quantity at this point
Send a message via AIM to sil80SR
How do i wire a KA24E MAF in a SR20DET?

hey, i need your help guys.
i searched, but no one ever explaid how to wire the sohc ka maf in a sr20det maf harness.

i got a s13 sr20det and i am replacing the maf.

what i got:
the MAF harness has a thick black wire with a red stripe, a normal black wire, and a white one

looks like i got a sr20det mafs installed but its bad. or so i was told. (4 pin plug - only 3 wires)

the sohc maf that i found is a 3 pin plug (black/white, black, and white wires coming from the plug)

i connected the maf like this:
black/white to black/red, black to black, and white to white.

it doesnt run very well. the car is chocking down on gas at 3500 rpms. feels like its going into the "safemode" and its not ingiting the air/fuel mixture, and it just stops going up after about 3500rpms.

people told me that the wires dont connect by the color code... so here is my question...

does anyone know how to wire the SOHC MAF onto a SR20DET Maf harness. ?
sil80SR is offline   Reply With Quote
Sponsored Links