|
1 - Yes
2 - Have to test it. i dont have a car wire diagram
3 - should work. i always used the wire that controlled parking lights.
4 - same
5 - you should get on in the kit to mount yourself
6 - attach that to an ignition source
7 - not sure why you would need that if you have all your door trigger wires
8 - that will trigger your trunk release solenoid. if your not installing one, dont need it
9 - as long as it reads 12V with pedal pushed in
10 - looks like a starter kill relay. that would you should not have to do anything with that wire
11 - need more info on what that relay does
12 - thats just the selector for what type of door triggers you have. positive trigger or negative trigger
you can get constant power from your constant wire going to your ignition. any good solid ground will work for it
and the - means it needs to be a negative trigger input from the car.
hope this helps your out. pm me if you still have more questions
|