okay you cant just take the top off w/o at least unbolting the bottom 2 hangers cause of the studs that hold the lower and the upper to the motor theres not enough room to clear the 2 studs on the block
and as to taking the manifold off all you need is a 12mm ratchet the best way is to just use a extension and go threw the runners on the top bolts and the bottom ones well you gotta reach your hand down in there and do it that way
and if you have your harness on the stock top location then might wannna unplug the harness and move it back out the way of the intake to make more room
|