Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - FL FS 1990 S13 TWIN TURBO LS1 rocket bunny CCW Precision TOP NOTCH FABRICATION PROJECT

enriquetc240 · 07-11-2017, 12:48 PM

Its about time to part with my project.
Almost 90% of the parts are brand new. The only thing truly missing to finish the car are the seT of heads and injectors, and to your preference wire the car. If not you may use the wiring harness I currently have.
The bottom end is assembled, the LS3 heads are assembled, they are all hardened valves with dual springs etc. They just need to be mated to the block and engine assembled.
All of the custom parts and or metal fabrication was professionally done with Shiva at Straightline motorsports in Tamarac Fl.
In just metal Fab parts there are over $20k in invoices.
I will try to detail to the best of my knowledge below a small summary of parts and mods, but please keep in mind there are many more things with this build that I can possibly remember.

Please feel free to contact me. Enrique @ 305-923-1260
I will gladly answer any questions or send more detailed pictures, facetime etc for serious buyers.

I am willing to sell or trade for other toys.
Price is $28,000 OBO.
I COULD SELL ROLLING CHASSIS SEPARATELY.

The car is a 1990 S13 (Clean title in hand)
Rocket Bunny body kit
Grey Scion TC grey paint
Custom Fiberglass hood to fit intake and turbos.
CCW mesh wheels, Mickey Thompson Street comp up front, ET Street outback.
Roll Cage with gusset plates to chassis as well, NHRA specs.
Front tubular strut towers to bumper support and led headlamp and intercooler mounts with gussets etc.
Rear tubular bumper support with parachute.
Sparco seat belts.
Sparco seats.
New window moldings throughout
Z32 brakes front and back, back E brake conversion correctly done etc.
LS1 bottom end, with Wiseco pistons, and Carrillo I beam rods (The bottom end is completely assembled and just machined ready to be mated to new heads.
ATI engine damper.
Custom ground cam.
Heads, I have oem LS3 heads with some valve work done, however I recommend to use aftermarket heads. This is basically the only missing parts to the engine build.
Aeromotive A1000 fuel pump mounted and Fuel regulator. All AN lines with nylon braided hoses.
Custom Radiator with AN16 lines.
Dual Tial Blow off valves and Wastegates.
Precision 62-66 billet turbos. (Housings recently polished.)
Custom intercooler.
Custom cold piping. All Vband. (Recently polished)
Custom Tubular turbo manifolds.
Custom down pipes. All VBand.
Custom aluminum exhaust. All VBand.
Custom Catch can All AN lines.
ACT dual disk clutch and flywheel assembly.
Custom Intake manifold.
Custom aluminum valve covers, not pictured.
Driveshaft shop rear axles.
Nismo Rear LSD.
All Suspension parts aftermarket, as well as rear subframe mounts and reinforced subframe.

And many more parts not listed. Please look at the project pictures.
Car is located in Miami, FL.

07-11-2017, 12:48 PM	#1
enriquetc240 Zilvia Member Join Date: Nov 2007 Location: Miami Posts: 219 Trader Rating: (4)	FS 1990 S13 TWIN TURBO LS1 rocket bunny CCW A1 PROJECT (WILLING TO SELL CHASSIS) Its about time to part with my project. Almost 90% of the parts are brand new. The only thing truly missing to finish the car are the seT of heads and injectors, and to your preference wire the car. If not you may use the wiring harness I currently have. The bottom end is assembled, the LS3 heads are assembled, they are all hardened valves with dual springs etc. They just need to be mated to the block and engine assembled. All of the custom parts and or metal fabrication was professionally done with Shiva at Straightline motorsports in Tamarac Fl. In just metal Fab parts there are over $20k in invoices. I will try to detail to the best of my knowledge below a small summary of parts and mods, but please keep in mind there are many more things with this build that I can possibly remember. Please feel free to contact me. Enrique @ 305-923-1260 I will gladly answer any questions or send more detailed pictures, facetime etc for serious buyers. I am willing to sell or trade for other toys. Price is $28,000 OBO. I COULD SELL ROLLING CHASSIS SEPARATELY. The car is a 1990 S13 (Clean title in hand) Rocket Bunny body kit Grey Scion TC grey paint Custom Fiberglass hood to fit intake and turbos. CCW mesh wheels, Mickey Thompson Street comp up front, ET Street outback. Roll Cage with gusset plates to chassis as well, NHRA specs. Front tubular strut towers to bumper support and led headlamp and intercooler mounts with gussets etc. Rear tubular bumper support with parachute. Sparco seat belts. Sparco seats. New window moldings throughout Z32 brakes front and back, back E brake conversion correctly done etc. LS1 bottom end, with Wiseco pistons, and Carrillo I beam rods (The bottom end is completely assembled and just machined ready to be mated to new heads. ATI engine damper. Custom ground cam. Heads, I have oem LS3 heads with some valve work done, however I recommend to use aftermarket heads. This is basically the only missing parts to the engine build. Aeromotive A1000 fuel pump mounted and Fuel regulator. All AN lines with nylon braided hoses. Custom Radiator with AN16 lines. Dual Tial Blow off valves and Wastegates. Precision 62-66 billet turbos. (Housings recently polished.) Custom intercooler. Custom cold piping. All Vband. (Recently polished) Custom Tubular turbo manifolds. Custom down pipes. All VBand. Custom aluminum exhaust. All VBand. Custom Catch can All AN lines. ACT dual disk clutch and flywheel assembly. Custom Intake manifold. Custom aluminum valve covers, not pictured. Driveshaft shop rear axles. Nismo Rear LSD. All Suspension parts aftermarket, as well as rear subframe mounts and reinforced subframe. And many more parts not listed. Please look at the project pictures. Car is located in Miami, FL. __________________ Last edited by enriquetc240; 10-17-2017 at 09:19 AM..