Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - AC system install in RB25 swapped '96 S14

dbeiler · 08-05-2016, 05:52 PM

RB25 compressor on RB25 bracket

J30 compressor mounted. See how the pulleys don't line up correctly? That must be fixed.

I used two washers as spacers on each upper mounting bolt

Spacers installed

Now, of course, the lower bolt holes don't line up.

I used a Dremel with a cutting bit

Elongated the holes till the bolts would fit in correctly.

08-05-2016, 05:52 PM	#2
dbeiler Zilvia Junkie Join Date: Jun 2012 Location: Lancaster county, PA Age: 33 Posts: 465 Trader Rating: (4)	RB25 compressor on RB25 bracket J30 compressor mounted. See how the pulleys don't line up correctly? That must be fixed. I used two washers as spacers on each upper mounting bolt Spacers installed Now, of course, the lower bolt holes don't line up. I used a Dremel with a cutting bit Elongated the holes till the bolts would fit in correctly.