Quote:
Originally Posted by Civillized
So I bought a 1993 240sx SE and I wanted to put the OEM 180sx front bumper on it. I'm not too experienced and I was wondering if I needed any extra parts other than the front bumper extensions and the front bumper. Here is the link https://www.nissanparts.cc/180sx-kou...25?parent=1019 . Any advice would be appreciated. |
First it looks like this is your first post, so welcome to Zilvia.
Second, this thread will probably bring you same heat, but try not to take it personally, you might be new to forums for all we know.
Third, I'd recommend searching for this, a number of threads document the 180 Aero installation process, what you will need, wiring, other parts etc.
I personally wouldn't recommend doing real 180 Aero, because of the complexity and the fact if you ever get a front mount intercooler you will likely be cutting that nice new expensive bumper up, instead look into some of the fiberglass copies which you might not feel so bad hacksawing to shreads if you eventually need to route piping through it.
If you persist on the 180 aero direction here are some resources...
http://zilvia.net/f/showthread.php?t=169993
http://zilvia.net/f/showthread.php?t=260639
Best of luck!