Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - problem with brake pad not contacting rotor 100%

TurDz · 05-29-2005, 02:02 AM

my update. About 2/3 of the ring has disappeared, and 1/3 still remains with very light rust. I'm thinking the rest will go away eventually.

The only thing I did was re-bleed my brakes (because we accidentally put air in the lines, not good). Maybe there wasn't enough hydraulic pressure on it. Because when I saw the air bubbles in the rear lines, WOW...it was a lot of volume (looking at the vinyl tubing, there was about 1 ft. of pure air between the fluid.

Thanks for all the help guys.

05-29-2005, 02:02 AM	#10
TurDz Nissanaholic! Join Date: May 2003 Location: Bay Area, CA Posts: 1,618 Trader Rating: (0)	my update. About 2/3 of the ring has disappeared, and 1/3 still remains with very light rust. I'm thinking the rest will go away eventually. The only thing I did was re-bleed my brakes (because we accidentally put air in the lines, not good). Maybe there wasn't enough hydraulic pressure on it. Because when I saw the air bubbles in the rear lines, WOW...it was a lot of volume (looking at the vinyl tubing, there was about 1 ft. of pure air between the fluid. Thanks for all the help guys.