Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Giorgakis02 · 12-26-2007, 06:42 PM

make sure that the number 1 cyl is at tdc. then take the distributor off and take the cap off till you see the rotor. and the book says to set it at the no1 spark plug. but you have to set it at the one under it because when you insert it into the engine it will move up to the number 1 spark. after that ur set.

12-26-2007, 06:42 PM	#2
Giorgakis02 Join Date: Aug 2007 Location: Philadelphia Age: 38 Posts: 12 Trader Rating: (0)	make sure that the number 1 cyl is at tdc. then take the distributor off and take the cap off till you see the rotor. and the book says to set it at the no1 spark plug. but you have to set it at the one under it because when you insert it into the engine it will move up to the number 1 spark. after that ur set.