Well then that pulley wont work. If you were to compare the length of the moment arm of the s13 pulley on the s13 throttle body, with the length of the moment arm of an s14 pulley (installed backwards from the way its installed on an s14 throttle body) installed on an s13 throttle body, the way you have it, its about 4 times longer and the bending loads are 4 times more.
Since I'm blind and cant see that this is the only configurstion that will work the easiest thing to do, is make a pedal stop. This will limit the force pulling/bending on the end of the axle once its fully rotated and resting on its stop.
Or you can disregard my advise and do nothing and keep hoping for a different result.
|