Quote:
Originally Posted by PantsOnTheGround
hey guys. so yesterday i swapped out my stock rb20 turbo for a newerish rb20 turbo (because it was only $160) and after getting everything hooked back up right i took it for a test drive and it barely made much power. one thing i did notice were that a couple bolts that hold the cold side of the turbo from turning were loose but i couldnt get to them. everything else was tight. what would cause the turbo to spool up but not create any boost? im stumped!
|
Stuck / Bad wga. I'd start there. See if ur wastegate arm moves freely