Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - installed WS harness. car only starts on starting fluid

Kingtal0n · 06-24-2018, 10:32 AM

I had a friend put a Wiring specialty harness into a 240sx. It started having misfires at random. Finally I found that one of the pins in the harness wasn't making good contact with the ECU.

I had to shove some bits of wire in there to get it to be consistent.

Just a heads up that WS isn't exactly quality control

maybe the orange one isn't really making good contact in the ECU plug sometimes.

06-24-2018, 10:32 AM	#7
Kingtal0n Post Whore! Join Date: Jul 2005 Location: South Florida Age: 41 Posts: 4,829 Trader Rating: (17)	I had a friend put a Wiring specialty harness into a 240sx. It started having misfires at random. Finally I found that one of the pins in the harness wasn't making good contact with the ECU. I had to shove some bits of wire in there to get it to be consistent. Just a heads up that WS isn't exactly quality control maybe the orange one isn't really making good contact in the ECU plug sometimes.