|
I helped put the ls1 in the fd car pictured above. He is sponsored by hinson, but the mounts are a joke design wise (very simple). The crossmember is slightly modified to accomodate the oil pan, the crossmember is spaced down from the frame rails, triangle brackets are used to attach the engine to the crossmember with corvette motor mount plates, and the transmission mount is anything you want to fab that runs from frame rail to frame rail. The transmission is very close to the tunnel, but if spaced properly it will clear (ie hinson mounts).
LS1 is completely easy, only issue is builidng or finding headers that fit. The hinson ones fit fine of course.
|