Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

keaning · 04-20-2016, 07:22 PM

The 4 pin connector goes like this
A. No pin
B. 12v
C. Negative
D. Signal
If you have power and ground, then pull the sensor out and clean it, otherwise try a different maf because z32 is completely different and probably won't run good at all

04-20-2016, 07:22 PM	#5
keaning Join Date: Aug 2011 Location: washington Age: 30 Posts: 9 Trader Rating: (0)	The 4 pin connector goes like this A. No pin B. 12v C. Negative D. Signal If you have power and ground, then pull the sensor out and clean it, otherwise try a different maf because z32 is completely different and probably won't run good at all