Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - TX S14 & S13 Wiper Motor Covers, Silvia Headlight Finish Panels Too!

riprodder · 05-31-2012, 04:17 PM

Sorry about the retrofit issue, but I think the way the Kouki's connector hangs off the back of the motor would make it difficult to make a cover for it. Changing the connector to the old style shouldn't be that hard. I think it's only 3 or 4 wires, a little solder and you're done. The motor itself is held down with 4 bolts and then there is one nut on the backside. The whole swap would probably take about an hour if you had all the parts.

05-31-2012, 04:17 PM	#18
riprodder Zilvia Member Join Date: Dec 2009 Location: Fort Worth, TX Posts: 173 Trader Rating: (30)	Sorry about the retrofit issue, but I think the way the Kouki's connector hangs off the back of the motor would make it difficult to make a cover for it. Changing the connector to the old style shouldn't be that hard. I think it's only 3 or 4 wires, a little solder and you're done. The motor itself is held down with 4 bolts and then there is one nut on the backside. The whole swap would probably take about an hour if you had all the parts. __________________ Coupe Love!