Quote:
Originally Posted by silviaks2nr
Well if you are keeping the barrels and faces the same, then it should just be a matter of chosing which lip size you want. I don't know what a wheel sizing chart is going to tell you>? I would probably do no more than 2.5" if its on metal fenders, but obviously what width tire you want to run is going to have an affect here too.
|
yes i agree with what you are saying. I have 17x7 +45 low disk and 17x7.5+37 high disk and i swapped the faced in between the two because i wanted deeper inner barrels in the rear. I am also relipping the rears at the same time. I just want to have all the specs with me because when i had work equips, i had the sizing chart as well. its always good to have.
-Andrew