View Single Post
Old 03-07-2016, 05:16 PM   #41
UniqueAutoCreations
Zilvia Junkie
 
UniqueAutoCreations's Avatar
 
Join Date: Jul 2013
Location: Texas
Posts: 324
Trader Rating: (8)
UniqueAutoCreations is a jewel in the roughUniqueAutoCreations is a jewel in the roughUniqueAutoCreations is a jewel in the roughUniqueAutoCreations is a jewel in the roughUniqueAutoCreations is a jewel in the roughUniqueAutoCreations is a jewel in the roughUniqueAutoCreations is a jewel in the rough
Here's a few of the latest pics. This is the production prototype so it looks just like what the actual one will be. You will notice in pics #2 and #3 that the holder has a back plate that runs from the top to the bottom to keep stuff from sliding under it, essentially "dividing" off the back pocket. This way you have the divider and a cup holder.

Also I still need those accurate measurements for the S14 consoles with the divider slot. If anyone with a console and a set of calipers could take a quick measurement I'd really appreciate it. My console measures 3.210" wide at the front of the pocket for reference but it gets a little wider as you move to the back.







__________________
Get custom 240sx parts at:
www.UniqueAutoCreations.com
UniqueAutoCreations is offline   Reply With Quote