View Single Post
Old 06-17-2016, 08:17 AM   #7
greenwood
Zilvia Addict
 
greenwood's Avatar
 
Join Date: May 2011
Location: nc
Posts: 620
Trader Rating: (5)
greenwood is not welcome here anymoregreenwood is not welcome here anymoregreenwood is not welcome here anymoregreenwood is not welcome here anymoregreenwood is not welcome here anymoregreenwood is not welcome here anymoregreenwood is not welcome here anymoregreenwood is not welcome here anymoregreenwood is not welcome here anymore
Did you test resistance on the injectors to see if they are good. Should measure between 10-14ohm.

If not good they will need to be replaced. This is the best type to upgrade to j30 or type 2 injectors that do not fall apart due ethanol. I tested mine on my z and they tested out to 11ohm thank goodness I didn't want to pull the plenum to replace.
greenwood is offline   Reply With Quote