Little Update:
This is always a good sign!!
good stuff!
Needed to re-make the oil line for my oil coolers that went from the motor to my thermostat
..came out good!
Finally got around to finishing up the manifold turbo flange..needed to be port matched to the divided housing. It was off alot. Don't have pics but it was off almost a 16th of an inch on the right side of each divided port..if that makes sense.
THis is finished though.
Got the adapter for my power steering line... no more banjo oem line!!
out with the old in with the new!!
installed
also put a AN plug in the bottom of my UIM...been putting this off for far too long..