Quote:
Originally Posted by Rob's S14
I'm confused...are modifications needed if you have an S14?
Looks very nice, but I want to be sure before I buy.
|
To replace the negative grounds? No. Simply remove the factory grounds and bolt this kit in place.
To use the matching positive battery terminal connector, yes. the OEM factory harness has a built-in battery terminal connector which will need to be cut off and you will need to crimp on a copper ring terminal that is supplied with the new positive terminal connector.
And if you notice, there's a couple lines that also connect to the positive terminal where the factory harness uses an adapter with connectors. And as stated in my previous post, you have a couple options...
a) cut off the oem connectors and wire them directly with the main line and then crimp to the supplied ring terminal. or..
b) take the side factory connector adapter, drill the mounting hole 1 size larger, then just mount directly to the side of the new positive terminal connector.
This is the same for s13 and s14, and all factory unmodified harnesses on KA, SR's, CA, and RB's.