Quote:
Originally Posted by blindside73
I turned in the idle screw to bring the rpms down from 2000 to 850. I believe in closed loop it's around 850 and open loop it's a little over 1000.
I'm also seeing some strange behavior with the CEL. There are codes but no light. The CEL is illuminated just before starting the car and turns off after starting. Does it take some time before the codes actually light up?
I'll address the codes before continuing to investigate the close/open loop switching. p0171 and p0400 are the codes
Thanks
Sent from my LG-H931 using Tapatalk
|
To lean and EGR problems.