Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - New Version Drift Freaq Custom Urethane KA/SR/CA Engine Mounts : Round 4

drift freaq · 01-24-2011, 01:28 PM

These are our latest version of High durometer Polyurethane engine mounts. The mount bolts do not run straight through the Urethane .

This is done so as to prevent vibrational transfer that you would get with a straight through side to side stud.

We have also upgraded the durometer to 80 for even more shear strength and changed the color , per user requests to British Racing Green ( though the pic in the sun makes them look lighter. lol)

On top of that these are not tubes of Polyurethane! They are a molded setup using Polyurethane you cannot buy at Home Depot (the industrial window caulking crap), which is inferior!

These can lower you engine up to 3/4 of inch depending on how you position them. You can also shift your engine backwards or forwards.

They have been track tested and run on many cars.

The maximum amount is achieved when the offset bolts are placed on the outside with the centered bolts on top.

There is a tech review of them as well here. http://zilvia.net/f/tech-talk/317539...ml#post3845752

It is highly recommended that you use the factory heat shield from your stock mounts on the exhaust side of the engine, especially if you are running a Turbo!

UPDATE TIME: ROUND 4. is now officially going.

UPDATE !! Its OFFICIAL we are starting the list for the Transmission mount group buy as well. It will be $85 we will need 5 people. It will have a bracket for the exhaust hanger. There will be a 3-4 week lead time from when the 5 people pay, this is for initial run production.

The Group buy price on the Engine Mounts is $115 per set with $15 for shipping anywhere in the continental U.S. For 5 people.

I decided to add this. If you do not care about the discount you can buy immediately at the $120 per set price which means $135 shipped.

STOP THE PRESSES! Ok I have a special for all of you wanting to save money. We have a limited number of Yellow's with centered studs. I forgot about these they were sitting in a box.

I am going to offer these at $100 a set with a minimum buy in of 5 people. $115 shipped!

If you want to buy them outright it will be $110 a set. Of course the deal is in the $100 a set.

This will be a one time only situation as soon as I run out that is it. No more Yellows and no more Yellows at this special price.
So if you want to get them and save some money buy now.

my paypal is [email protected]

01-24-2011, 01:28 PM	#1
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,562 Trader Rating: (215)	New Version Drift Freaq Custom Urethane KA/SR/CA Engine Mounts : Round 4 These are our latest version of High durometer Polyurethane engine mounts. The mount bolts do not run straight through the Urethane . This is done so as to prevent vibrational transfer that you would get with a straight through side to side stud. We have also upgraded the durometer to 80 for even more shear strength and changed the color , per user requests to British Racing Green ( though the pic in the sun makes them look lighter. lol) On top of that these are not tubes of Polyurethane! They are a molded setup using Polyurethane you cannot buy at Home Depot (the industrial window caulking crap), which is inferior! These can lower you engine up to 3/4 of inch depending on how you position them. You can also shift your engine backwards or forwards. They have been track tested and run on many cars. The maximum amount is achieved when the offset bolts are placed on the outside with the centered bolts on top. There is a tech review of them as well here. http://zilvia.net/f/tech-talk/317539...ml#post3845752 It is highly recommended that you use the factory heat shield from your stock mounts on the exhaust side of the engine, especially if you are running a Turbo! UPDATE TIME: ROUND 4. is now officially going. UPDATE !! Its OFFICIAL we are starting the list for the Transmission mount group buy as well. It will be $85 we will need 5 people. It will have a bracket for the exhaust hanger. There will be a 3-4 week lead time from when the 5 people pay, this is for initial run production. The Group buy price on the Engine Mounts is $115 per set with $15 for shipping anywhere in the continental U.S. For 5 people. I decided to add this. If you do not care about the discount you can buy immediately at the $120 per set price which means $135 shipped. STOP THE PRESSES! Ok I have a special for all of you wanting to save money. We have a limited number of Yellow's with centered studs. I forgot about these they were sitting in a box. I am going to offer these at $100 a set with a minimum buy in of 5 people. $115 shipped! If you want to buy them outright it will be $110 a set. Of course the deal is in the $100 a set. This will be a one time only situation as soon as I run out that is it. No more Yellows and no more Yellows at this special price. So if you want to get them and save some money buy now. my paypal is [email protected] __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html Last edited by drift freaq; 01-24-2011 at 01:44 PM.. Reason: sizing