Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

UniqueAutoCreations · 11-04-2016, 05:08 PM

Stainless Steel S13 Radio Brackets!
By UAC

UAC radio brackets are the affordable way to get some tunes in you favorite Nissan. These brackets are used to mount the radio in the factory location and are a direct replacement for the factory ones. Ours are even made from stainless steel so they will never rust! These really come in handy if your factory brackets are rusted, lost or stolen.

Bolts not included. Factory hardware can be used. These parts may contain sharp edges.

UAC radio brackets fit all Nissan S13’s including 240sx, 180sx, and Silvia’s

Price: $29.99 + shipping & tax if applicable All shipping charges stated are to the lower 48 states. Please contact me if you need it to go farther. Thanks

MEGA SALE! Still Going On. Heavy Duty S13 Tension Rod Brace Kit
By UAC

Heavy Duty S13 Tension Rod Brace Kit

Check out our Heavy Duty Tension Rod Brace Kit! It is a weld on kit that consists of two 11 gauge plates that box in the tension rod brackets and an 11 gauge square tube crossbar that ties them both together. The parts have been sand blasted to remove any surface contaminates and then treated with a self etching weld-through primer and are ready for installation. Think of it as a unit similar to the Nismo Power Brace only beefier and at a considerably better price. Install instructions are included. The pic above is of one that's been welded up and painted so you can get a good idea of what the finished assembly could look like.

Fits 89-94 240sx and all other S13's

Sale Price: $60 Shipped + Tax if applicable (was $89.99 + shipping). All shipping charges stated are to the lower 48 states. Please contact me if you need it to go farther. Thanks

ONLY 4 AVAILABLE!

The KIT is pictured above in the red box of the first photo. Here are some more pics of it once it has been welded up and installed.

For Orders please purchase through our site www.UniqueAutoCreations.com We accept Paypal and most major credit cards. This is really helpful for keeping track of orders, but if you would prefer an old fashioned invoice I can do that too. Just PM me with your paypal info and whether or not you are a Texas resident.

International Buyers, please contact me for an Invoice with the correct shipping charges. Thanks!

PM's welcome! I'll do my best to take care of your questions and orders in a timely manner.

Don't forget to check out our site for other cool S-Chassis parts too: www.UniqueAutoCreations.com

11-04-2016, 05:08 PM	#1
UniqueAutoCreations Zilvia Junkie Join Date: Jul 2013 Location: Texas Posts: 325 Trader Rating: (8)	Stainless Steel S13 Radio Brackets! Stainless Steel S13 Radio Brackets! By UAC UAC radio brackets are the affordable way to get some tunes in you favorite Nissan. These brackets are used to mount the radio in the factory location and are a direct replacement for the factory ones. Ours are even made from stainless steel so they will never rust! These really come in handy if your factory brackets are rusted, lost or stolen. Bolts not included. Factory hardware can be used. These parts may contain sharp edges. UAC radio brackets fit all Nissan S13’s including 240sx, 180sx, and Silvia’s Price: $29.99 + shipping & tax if applicable All shipping charges stated are to the lower 48 states. Please contact me if you need it to go farther. Thanks MEGA SALE! Still Going On. Heavy Duty S13 Tension Rod Brace Kit By UAC Heavy Duty S13 Tension Rod Brace Kit Check out our Heavy Duty Tension Rod Brace Kit! It is a weld on kit that consists of two 11 gauge plates that box in the tension rod brackets and an 11 gauge square tube crossbar that ties them both together. The parts have been sand blasted to remove any surface contaminates and then treated with a self etching weld-through primer and are ready for installation. Think of it as a unit similar to the Nismo Power Brace only beefier and at a considerably better price. Install instructions are included. The pic above is of one that's been welded up and painted so you can get a good idea of what the finished assembly could look like. Fits 89-94 240sx and all other S13's Sale Price: $60 Shipped + Tax if applicable (was $89.99 + shipping). All shipping charges stated are to the lower 48 states. Please contact me if you need it to go farther. Thanks ONLY 4 AVAILABLE! The KIT is pictured above in the red box of the first photo. Here are some more pics of it once it has been welded up and installed. For Orders please purchase through our site www.UniqueAutoCreations.com We accept Paypal and most major credit cards. This is really helpful for keeping track of orders, but if you would prefer an old fashioned invoice I can do that too. Just PM me with your paypal info and whether or not you are a Texas resident. International Buyers, please contact me for an Invoice with the correct shipping charges. Thanks! PM's welcome! I'll do my best to take care of your questions and orders in a timely manner. Don't forget to check out our site for other cool S-Chassis parts too: www.UniqueAutoCreations.com __________________ Get custom 240sx parts at: www.UniqueAutoCreations.com Last edited by UniqueAutoCreations; 12-02-2016 at 08:42 AM..