Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - CA BC 264 Cams, Springs/retainers, Rocker arm stoppers +More.

KingSpence · 11-01-2014, 02:38 PM

Parts are located in Alberta, CANADA. Shipping is obviously available to anywhere in North America.

----------------------

BC 264 camshafts. Plug and play application. Short duration for nice street manners, slight lope at idle. Excellent all purpose camshafts. OEM valve springs are fine but BC0200 Valve Spring Kit is strongly recommended.

Specs: 264/264 Duration and 12.06mm/12.06mm Lift Used for only half a summer, great condition.

http://www.enjukuracing.com/products...4-sr20det.html

Sold

---------------

BC valve springs/titanium retainers: Brand new in box. BC0200. I ran the 264 cams on stock springs, but upgrading your springs to these are HIGHLY recommended.

http://www.frsport.com/Brian-Crower-...T_p_15564.html

Sold

---------------

Tomei Rocker Arm Stoppers: Used, but in perfectly fine condition. Run these to prevent rocker arm salad when in higher rpm's with your sr20det. Tomei stamped you know they're legit. Picture for reference.

http://www.frsport.com/Tomei-13220R3...ET_p_1174.html

$50

---------------

Factory Nissan SR20DET camshafts. Amazing condition, came out of a low km engine. Still have paint on them from the factory

$50

11-01-2014, 02:38 PM	#1
KingSpence Join Date: Feb 2012 Location: Edmonton, AB Age: 33 Posts: 30 Trader Rating: (0)	BC 264 Cams, Springs/retainers, Rocker arm stoppers +More. Parts are located in Alberta, CANADA. Shipping is obviously available to anywhere in North America. ---------------------- BC 264 camshafts. Plug and play application. Short duration for nice street manners, slight lope at idle. Excellent all purpose camshafts. OEM valve springs are fine but BC0200 Valve Spring Kit is strongly recommended. Specs: 264/264 Duration and 12.06mm/12.06mm Lift Used for only half a summer, great condition. http://www.enjukuracing.com/products...4-sr20det.html Sold --------------- BC valve springs/titanium retainers: Brand new in box. BC0200. I ran the 264 cams on stock springs, but upgrading your springs to these are HIGHLY recommended. http://www.frsport.com/Brian-Crower-...T_p_15564.html Sold --------------- Tomei Rocker Arm Stoppers: Used, but in perfectly fine condition. Run these to prevent rocker arm salad when in higher rpm's with your sr20det. Tomei stamped you know they're legit. Picture for reference. http://www.frsport.com/Tomei-13220R3...ET_p_1174.html $50 --------------- Factory Nissan SR20DET camshafts. Amazing condition, came out of a low km engine. Still have paint on them from the factory $50 Last edited by KingSpence; 11-09-2014 at 11:14 AM..