[elguapo260sx]

bought the engine and trans to get my car running and set up the suspension. now im swapping in my rb26 and i dont not need this. email my at mrminitruckin at hotmail dot com or text eight5nine 3nine6 8five3one.sold the engine so now im parting out the rest. send me some offers

whats left
S14 5 speed- 2nd and 5th have a slight grind on fast shifts.
MAF, stock intake tube, and air box
5 speed crossmember
5 speed driveshaft
urethane trans mount
new clutch/pressure plate/throw out bearing/machined flywheel- 2000 miles on it
ralco short shifter- cheap but works good
s14 intake manifold with egr blocked off
starter
alternator
a/c compressor
p/s high pressure line is steel braided and has -6 AN ends
p/s pump with AN-6 fitting for the pressure
xtune (ebay special) header with exhaust wrap on the bottom half
96 auto engine main harness sold
95 5 speed trans harness missing rear o2 plug and speed sensor plug
96 auto ecu
95 manual ecu
97-98 5 speed trans harness sold