So...if the JDM DCC uses 2 plugs, a 20 wire and a 16 wire. Is it possible to use the 16 wire plug that is already connected on the USDM one?? after reppining/rewiring of course. After looking at the FSM, the 16 wire plug looks identical in the JDM and USDM chassis.
So the only plug that would be needed would be the 20 wire one. Right...? Which could probably be sourced from other Nissan's from the mid 90's era.
Can someone post of some pics of the back of their DCC? More specifically, the plugs and the back side of the DCC.
Thanks!
|