Quote:
Originally Posted by Driftbandit
I actually tried this yesterday, but it didn't work because the passenger side j30 6 bolt flange has the lock ring indent higher up on the shaft than the 5 bolt z flange. Basically it made the passenger side flange stick out about 1/2" too far. Might be a trick to it but I didn't see it happening. The open diff flanges fit, but were too short, so LSD was not going to engage. In an earlier post I said the 6 bolt vlsd flanges would work, but I only heard this, and again maybe there's a trick. I wouldn't do it though, just get the right axles, the zenki j30's.
|
Can you please explain what's going on here ^