Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - NV KA24E Supercharger kit | RX7 550cc Injectors | JDM Steering wheels

SAKURA · 07-08-2010, 09:38 PM

Fixed image sizes

All of this stuff is in Las Vegas.
If you want me to ship something, you agree to pay for the paypal fees, shipping costs, packaging costs, and my time.

IF YOU SEE SOMETHING IN THE PICTURES THAT YOU WANT BUT I DID NOT MENTION IT, MAKE ME AN OFFER.

Better pictures coming soon, the car is in storage and I am trying to figure out a way to get it back to my house.

KA24E Supercharger Kit
Details:
-Remote mount on exhaust side.
-Driven via AC belt and AC tensioner.
-Can be configured to run SMIC or FMIC or direct to intake.
-Can be configured to blow off to atmosphere or recirculate.
-Can be configured for pull through or blow through MAF.
-Will require you to figure out how you want it piped and if you want to blow off/recirc.
-MASSIVE increase torque all the way to redline over stock.
-Have no idea on numbers tho, motor blew ON THE DYNO.
-With the Reinhard, the singlecam sounds like a fucking monstrous V8. Heads TURN.
-This kit was made to clear SOHC Hot Shot headers. No idea if it will clear any other headers.
-Easily converted from SMIC to FMIC and pull through/blow through MAF
-BOV, N62 MAF, piping IS NOT INCLUDED.

What you will get:
-Eaton M90 from Ford Thunderbird
-Belt
-Custom mounting bracketry
-Custom inlet and outlet plates
-Custom 2.75" Injen intake pipe
-couplers for inlet and outlet
-KA24E Hot Shot Headers

car is sitting in storage, will take more pictures as soon as i can get it back to the house

ASKING PRICE: $1000
I WILL SHIP. YOU WILL PAY.

Parting out TWO KA24E motors
One blew on the dyno with the supercharger during a 4th gear pull.
Made a huge KLANG and the car jumped off the rollers a little.
I would say the bottom end is fucked, but I have not pulled the motor apart yet.

The other has been sitting in my garage for 2 years. Unknown condition.
Was planning to rebuild it but never got around to it.

Make offers on parts you want. WIRING HARNESS IS NOT FOR SALE AT THE MOMENT.

If you want to get the whole thing:
Entire motor that was used with the SC kit (no idea what was damaged) - $100 picked up
Spare motor that I have sitting around in unknown condition - $50 picked up

4 x RX7 FC 550cc top feed injectors $150
-with pigtails
-direct drop into KA24E with mazda OEM seals,
-serviced by WitchHunter Performance, less than 20 miles on injectors after servicing

SR20DET Intake hose (pictured being used on SOHC) $50

330mm Pink regular dish steering wheel JDM $100 each
you pick which one you want

380mm Black steering wheel $50

Bride Brix with Bride MO rail
-used
-both adjustment knobs are broken
-right knob completely missing
-left knob as pictured
-seat is adjustable with vice grips.
-small tear pictured.
-just need to clean it up.
-somewhere along the line this seat was once owned by lennon of dorkidori.

looking for $400 for the set.
will part with rail for $150.
will part with seat for $300

Parts Shop Max Rod End Shift Knob for S13/S14 $55
This is the same shift knob
Installed once, took it out to balcony. Did not like the feel of it. I will stick to stock for now.
Here are some compearison shots.

MORE TO COME

07-08-2010, 09:38 PM	#1
SAKURA Zilvia Junkie Join Date: Sep 2008 Location: 　 Posts: 345 Trader Rating: (22)	KA24E Supercharger kit \| RX7 550cc Injectors \| JDM Steering wheels \| Bride Brix Fixed image sizes All of this stuff is in Las Vegas. If you want me to ship something, you agree to pay for the paypal fees, shipping costs, packaging costs, and my time. IF YOU SEE SOMETHING IN THE PICTURES THAT YOU WANT BUT I DID NOT MENTION IT, MAKE ME AN OFFER. Better pictures coming soon, the car is in storage and I am trying to figure out a way to get it back to my house. KA24E Supercharger Kit Details: -Remote mount on exhaust side. -Driven via AC belt and AC tensioner. -Can be configured to run SMIC or FMIC or direct to intake. -Can be configured to blow off to atmosphere or recirculate. -Can be configured for pull through or blow through MAF. -Will require you to figure out how you want it piped and if you want to blow off/recirc. -MASSIVE increase torque all the way to redline over stock. -Have no idea on numbers tho, motor blew ON THE DYNO. -With the Reinhard, the singlecam sounds like a fucking monstrous V8. Heads TURN. -This kit was made to clear SOHC Hot Shot headers. No idea if it will clear any other headers. -Easily converted from SMIC to FMIC and pull through/blow through MAF -BOV, N62 MAF, piping IS NOT INCLUDED. What you will get: -Eaton M90 from Ford Thunderbird -Belt -Custom mounting bracketry -Custom inlet and outlet plates -Custom 2.75" Injen intake pipe -couplers for inlet and outlet -KA24E Hot Shot Headers car is sitting in storage, will take more pictures as soon as i can get it back to the house ASKING PRICE: $1000 I WILL SHIP. YOU WILL PAY. Parting out TWO KA24E motors One blew on the dyno with the supercharger during a 4th gear pull. Made a huge KLANG and the car jumped off the rollers a little. I would say the bottom end is fucked, but I have not pulled the motor apart yet. The other has been sitting in my garage for 2 years. Unknown condition. Was planning to rebuild it but never got around to it. Make offers on parts you want. WIRING HARNESS IS NOT FOR SALE AT THE MOMENT. If you want to get the whole thing: Entire motor that was used with the SC kit (no idea what was damaged) - $100 picked up Spare motor that I have sitting around in unknown condition - $50 picked up 4 x RX7 FC 550cc top feed injectors $150 -with pigtails -direct drop into KA24E with mazda OEM seals, -serviced by WitchHunter Performance, less than 20 miles on injectors after servicing SR20DET Intake hose (pictured being used on SOHC) $50 330mm Pink regular dish steering wheel JDM $100 each you pick which one you want 380mm Black steering wheel $50 Bride Brix with Bride MO rail -used -both adjustment knobs are broken -right knob completely missing -left knob as pictured -seat is adjustable with vice grips. -small tear pictured. -just need to clean it up. -somewhere along the line this seat was once owned by lennon of dorkidori. looking for $400 for the set. will part with rail for $150. will part with seat for $300 Parts Shop Max Rod End Shift Knob for S13/S14 $55 This is the same shift knob Installed once, took it out to balcony. Did not like the feel of it. I will stick to stock for now. Here are some compearison shots. MORE TO COME Last edited by SAKURA; 07-15-2010 at 07:31 PM..