i did resolve my injector issues i put new rubber o rings and spacers and the injectors themselves are brand new. i also pulled the fuel rail and cranked to make sure they’re all working properly and they look perfect
i have had smoke on startup and idle before i even went ka-t due to bad valve seals which i need to replace anyway but i’m thinking the valve seals on cylinder 4 tore completely out of shape which would be why the oil seems to be seeping and filling the cylinder.
compression was all right close to 150 on all but they seemed to rise a little when adding oil. i am not convinced it’s my rings seeings how it just suddenly started smoking and misfiring bc of the cylinder filling with oil all at once i figured rings would slowly start to go bad
Sent from my iPhone using Tapatalk
|