Thread: Eoken's S13
View Single Post
Old 05-24-2017, 01:34 AM   #59
Eoken
Zilvia Member
 
Join Date: Feb 2015
Location: Austin, TX
Posts: 188
Trader Rating: (1)
Eoken is an unknown quantity at this point
Time to sort out the leaky coolant overflow tank.



eBay tank with a custom bracket I welded up works nicely.













Five speed off! six speed on!



Autech S15 single mass lightweight flywheel + Nismo coppermix clutch installed.



Six speed mounted and looking good!





I have always wanted to make an inter cooler sprayer using the rear washer fluid pump. I picked up some spare OEM fittings including single hose mounts, Y connector, spare pumps, reservoir and hose.



I routed the hose through the frame as shown.



the sprayers came free with the car and they work great!





I cut out a bit of the reservoir and epoxied it back together to make some room for the inter cooler piping. It is a work in progress and I might have to take more off later.



filler neck was shorted and RTV was used to seal it back up.







works like a charm!



I even wired it up to the blue arcade button that used to be a start button in my old car



S15 helical differential came in! the drive train is complete and I am now ready to pull my engine and put in my SR20DET XD let the fun begin!





smaller battery for inter cooler piping room.

Eoken is offline   Reply With Quote