View Single Post
Old 01-12-2019, 02:05 PM   #29
slider2828
Post Whore!
 
slider2828's Avatar
 
Join Date: Oct 2004
Location: San Francisco, CA
Posts: 5,992
Trader Rating: (13)
slider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfection
S14 rear pickup points for suspension is different for suspension, so the rear sway bar is not interchangeable. The front track width are also different and also S14 utilize straight bolt through sway bar where as s13 is blade type.

Don't bother with S14 sway bars on s13, you will get suspension bind....

8/6 is sufficient for road going s13's with some stick rubbers. 10/8 if you running the track with wide tires like 265 or 275s with all suspension mods.

Don't bother much with knuckles and junk until you swap your s13 subframe for a s14 or s15 subframe. That will give you better traction than spending all the monies on knuckles.
__________________
Turn and Burn!
slider2828 is offline   Reply With Quote