I disassembled all my sp1's to do some face swapping and painting. I should end up with a pair of 17x9.5 +0 HP, 17x10 +11 NR, and 17x10 +11 SL if my calculations are correct.
And after 32 hours of curing I got to work shaping the drop vent.
The first stage was done with a hacksaw blade. I had a ton of excess and separating the foam from the tape was nowhere near as easy as the internet made it look (of course).
After a few hours of sanding with 40 grit I got it pretty much where I want it. I'll be covering it in waxed tape or something for molding, so the edges will be dulled a bit.
Andddd started paint prep... Here we go again...