There were some pinholes in the metal after it was powder coated that I hadn't noticed previously so I had them tig welded and then I sanded it all back smooth. There is a little bit of a low spot on top so I will likely have it coated again to see if it's noticeable and if so, I will have it filled and painted. Going to be very particular about the way the engine looks on this car. The filler panel on the valve cover is one of my favorite details about this build and one that will be mostly ignored by the majority but greatly appreciated by those who notice.
![](https://c2.staticflickr.com/2/1868/29172026927_29e4ed1efd_b.jpg)