Quote:
Originally Posted by 1UZVillain
im getting one made just for the swap hopefully it makes other minor wiring easier
|
These are the plugs i got from the yacht under the glove box area. The gray is for the ecu (28p) should have my ing,const,mrely. The large white dash plug has the larger black starter wire and powers to the sensors for sure. By wiring through these plugs everything on the motor harness works as if it was connected in the original car. where would fuses and realys be needed if at all by doing it this way?
IMG_0883.jpg
then assuming i could do some of the wiring too this for my key to start the motor and the other stuff to the s13 dash connector near the ecu.
IMG_0887.jpg