Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

So Make Like · 08-29-2014, 02:00 PM

I just finished my rebuild and ran into an oil leak on the exhaust side of the motor. Unless only one spot of my upper pan gasket is leaking, I'm sure it's the oil feed banjo bolt that's leaking. Looking at it now, how many copper washers should be on there? Mines only has one on the outside.

[BLOCK] (BANJO) | ===[]

^ That's how it sits now. Am I missing one on the inside? I hate these things.

08-29-2014, 02:00 PM	#1
So Make Like Leaky Injector Join Date: Apr 2013 Location: hawai'i nei Posts: 146 Trader Rating: (0)	SR20DET question! I just finished my rebuild and ran into an oil leak on the exhaust side of the motor. Unless only one spot of my upper pan gasket is leaking, I'm sure it's the oil feed banjo bolt that's leaking. Looking at it now, how many copper washers should be on there? Mines only has one on the outside. [BLOCK] (BANJO) \| ===[] ^ That's how it sits now. Am I missing one on the inside? I hate these things.