Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Danger_Dorn · 10-29-2013, 06:57 AM

So I ran on the dyno with my car this weekend. I have a rebuilt stock redtop with the t25, 370's, fmic, 62 ecu, 14psi, good clutch. I managed to pull 176 to the wheels on the dyno. To me this sounds low. I did the math (whp/.75) it came out to 234 at the crank? Right or wrong. Also my curve was kind of jumpy. My friend with a stock setup at 8psi pulled exactly the same....and ideas or was he just pulling high?

10-29-2013, 06:57 AM	#1
Danger_Dorn Zilvia Member Join Date: Oct 2012 Location: Jacksonville NC Age: 33 Posts: 265 Trader Rating: (0)	Strange happenings on the dyno So I ran on the dyno with my car this weekend. I have a rebuilt stock redtop with the t25, 370's, fmic, 62 ecu, 14psi, good clutch. I managed to pull 176 to the wheels on the dyno. To me this sounds low. I did the math (whp/.75) it came out to 234 at the crank? Right or wrong. Also my curve was kind of jumpy. My friend with a stock setup at 8psi pulled exactly the same....and ideas or was he just pulling high? Last edited by Danger_Dorn; 10-29-2013 at 07:37 AM..