|
This is quoted from NICO also but I can vouch for this because I used it on my RB25.
My new find with all this trial and error is that the vq35 slave cylinder out of the 05 Maxima and 350z will fit the pattern and is bolt on. No drilling is required but you will find that it is a bit more round on the back and the stock bolts aren't long enough to fit. That is no problem easy fix. Extended bolts and spacers. I just did this and works beautifully.
Advance Auto Parts # 900043
2 M10-1.50 x 40mm Bolts (17mm hex head) Lowe's Item Number 138219
2 bags of 10mm Flat washers Lowe's Item Number 138377
2 10mm lock washers Lowe's Item Number 138380
Take your old one off.
Put in the new bolts 1 lock washer on each head and then 5 flat washers behind each and reassemble. This will push it all out and line up the way it should. Works great and for $33.48 you can have it that same day. Hope this helps everyone instead of drilling everything and paying an arm and a leg.
Goodluck,
David
|