Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - TX 1990 240sx/Silvia Conversion SR Swap w/ Built head. Cheap!!

ik0n · 06-10-2012, 11:36 AM

1990 Nissan 240sx

VIN-jn1hs34p1kwo21304
where-tyler texas
miles- odo says 126xxx but title says unknown
price- $5500
manual trans
clear title in hand

WITH:

Megan street coils
Silvia conversion (bricks no broken tabs & 6k hid)
VLSD
energy suspension bushings all over
5 lug, q45 brakes
custom harness bar
smoked tail lights + corners
megan 3" exhaust
red fn01rc 17x8/9+35.
SR20DET
Extra bottom end/shortblock

Head work:

3* valve job and assembly done at casting repair in tyler texas. the
owner specializes in import head rebuilding. he is the best in the area.
brian crower 264* stage 2 cams
brian crower valve springs
brian crower ss intake valves 1/2 mm oversized
oem 7mm sodium filled exhaust valves
bronze/manganese exhaust valve guides
oem steel intake valve guides
new oem valve stem seals
2001 infiniti g2 hydraulic lifters ( larger oil port & high flow design= no valve float till after 9,000 rpms)
99 sentra se-l 2.0 rocker arms machined for notched shims on both valves. ( deeper bowl better for cams with large lift and helps with valve float issue if reving to 9k or higher double notched shims so if one valve does float your rocker arm wont fall off.)
greddy rocker arm stoppers

The car runs great, but when I had it compression tested it had low compression in cyl 2&4. I just dont have the time to work on it anymore thats why I'm selling it. Also including the extra good bottom end for those that have time.. You could probably drive it as is and build that other bottom end. The head is still good.

Ideally I want cash. But I will accept reasonable trades.

$5500 obo

If someone buys it at $5500, I'll include Buddy Club P-1 Limited Edition Carbon Fiber (wide) Seat and S13 Drivers Side Buddy Club Seat Rail for side mounted seats. Not installed.

More pics upon request.

Pics:

06-10-2012, 11:36 AM	#1
ik0n Leaky Injector Join Date: Nov 2006 Location: earth Age: 38 Posts: 89 Trader Rating: (0)	1990 240sx/Silvia Conversion SR Swap w/ Built head. Cheap!! 1990 Nissan 240sx VIN-jn1hs34p1kwo21304 where-tyler texas miles- odo says 126xxx but title says unknown price- $5500 manual trans clear title in hand WITH: Megan street coils Silvia conversion (bricks no broken tabs & 6k hid) VLSD energy suspension bushings all over 5 lug, q45 brakes custom harness bar smoked tail lights + corners megan 3" exhaust red fn01rc 17x8/9+35. SR20DET Extra bottom end/shortblock Head work: 3* valve job and assembly done at casting repair in tyler texas. the owner specializes in import head rebuilding. he is the best in the area. brian crower 264* stage 2 cams brian crower valve springs brian crower ss intake valves 1/2 mm oversized oem 7mm sodium filled exhaust valves bronze/manganese exhaust valve guides oem steel intake valve guides new oem valve stem seals 2001 infiniti g2 hydraulic lifters ( larger oil port & high flow design= no valve float till after 9,000 rpms) 99 sentra se-l 2.0 rocker arms machined for notched shims on both valves. ( deeper bowl better for cams with large lift and helps with valve float issue if reving to 9k or higher double notched shims so if one valve does float your rocker arm wont fall off.) greddy rocker arm stoppers The car runs great, but when I had it compression tested it had low compression in cyl 2&4. I just dont have the time to work on it anymore thats why I'm selling it. Also including the extra good bottom end for those that have time.. You could probably drive it as is and build that other bottom end. The head is still good. Ideally I want cash. But I will accept reasonable trades. $5500 obo If someone buys it at $5500, I'll include Buddy Club P-1 Limited Edition Carbon Fiber (wide) Seat and S13 Drivers Side Buddy Club Seat Rail for side mounted seats. Not installed. More pics upon request. Pics: