|
Ok its out of the mode. I was finally able to connect my consult port to my laptop. There are no codes (well it says something about new_ok or something along those lines). When its cold, it runs ok and idles ok. I didn't get a log yet of cold, but when warm I did. The 02 sensor voltage was constant at 1.27. Its a new sensor too, which is leading me to the connections. I think its wreaking havoc because when its warm, my wideband is reading around 10 and dipping into the 9s and has a rough and hunting idle. Timing is jumping and so is the maf. Mehh.
|