Yes I am running a completely stock SR20DET blacktop non-VVT setup with the only internal change being the addition of rocker arm stoppers.
I am going to have compression and leakdown test done. If the bottom end comes out ok, I will mount up a modded head with 264 cams and Ti retainers, ARP studs and Apexi HG. Then we'll see what it puts down on the same dyno for comparison, and I'll probably find a local DJ dyno for comparison. I just recently had an emissions test done and without a catalytic converter it sniffed out as running super clean. I have no indication that the bottom end or top end are faulty other than that the oil dip stick pops out sometimes due to crankcase vent pressure.
|