Quote:
Originally Posted by PoorMans180SX
Seems like you don't have a stop to your throttle cable/pedal, causing you to put a lot of stress on the throttle shaft when you are smashing that pedal to the floor, haha.
Fab up a stop for the throttle pulley. Problem solved.
|
It HAS to be this, right?
I just installed a new KA throttle cable on an SR throttle body, S14, and I KNOW I set it up properly....
When the throttle is fully open (verified by a second person), the pedal is NOT touching the pedal stop.
I guess the SR throttle is smaller than the KA one, and thus requires less pedal throw to fully rotate 90*.
I plan to install a piece of 2x4 or something on top of the pedal stop so that the pedal JUST hits the stopper as it opens all the way.